Publications on metrology & quality control

homepage www.feanor.com

Publications, documents and books on metrology, including lenght metrology, laser metrology, surface metrology, optics, calibration, torque calibration, industrial statistics, acceptance sampling and statistical quality control.

Feanor scientific papers (PDF)
Torque calibration - presented at the International Conference of Calibration Laboratories, Luca Bochese, Jerusalem Mai 2000
Transportable laser calibration device - presented at the ISQ Conference, Luca Bochese, Jerusalem Nov 2000

Magazines
Quality Engineering, metrology in Germany, in German
Opto & Laser Europe laser technology, a good source for R&D as well, in English
Quality in Manufacturing, in English

Books and documents on dimensional metrology
1. Eindimensionale Längenprüftechnik, M. Schaller, K. Tischler, H. J. Bestenreiner, Beuth Kommentare, DIN 1993
2. Längenprüftechnik 1, Grundnormen , Meßgeräte - DIN Taschenbuch 11, Beuth 1991
3. Längenprüftechnik 2, Lehren - DIN Taschenbuch 197, Beuth 1998, 1.2.3. (are a must for any German speaking metrologist)
4. Guide to the expression of measurement uncertainty, ISO 1993
5. Guidelines for evaluating and expressing the uncertainty of NIST measurement results, Taylor, Kuyatt, NIST Tech.note 1993
6. Fundamentals of dimensional metrology, Busch, 12/1998 3ed. Delmar Publishers
7. Handbook of dimensional measurement, 3 rd ed., Francis T. Farago, ASQ Quality Press, Milwaukee, USA
8. Measuring and gaging geometric tolerances, Gary K. Griffith, ASQ Quality Press, Milwaukee, USA
9. An introduction to Measurement and Calibration, ASQ Quality Press, Milwaukee, USA
10. Geometric Tolerancing applications book, Alex Krulikowski, ASQ Quality Press, Milwaukee, USA
11. Metrology, Jerome V. Scholle, 02/1993 Addison Wesley Longman Inc.
12. Optical metrology, 2ed. Kjell J. Glasvik
13. Laser metrology & Machine Performance II, 07/1995 Computational Mechanics, Inc, ed. Hope, Smith and Blackshaw
14. Handbook of surface metrology, D.J.Whitehouse, Institute of Physics Publishing
15. International vocabulary of basic & general terms in metrology, Beuth Verlag 1994
16. Metrology for Engineers, J.F.W. Galyer and Charles Shotbolt, Cassell PLC 1990
17. Dimensional metrology in production and quality control, Intl. Symposium Proceedings, VDI 12/1989
18. Optical measurements: Techniques and Applications, f. Mayringer, Springer Verlag NY Inc 08/1994
19. Interferometric metrology, Norman Bobroff, W.Tyler Estler, 04/1992 American Society for Precision Engineering
20. Basics of interferometry, P. Harihanan 11/1991 Academic Press Inc. Australia
21. Interferometry, W.H. Steel, Cambridge Monographics on Physics
22. Managing the metrology system, 2.ed. C.Robert Pennella, ASQC Quality Press, USA
23. Inspection and Gaging, 6th Edition, Kennedy, Hoffman, Bond, Industrial Press Inc, New York, ISBN 0-8311-1146-6
24. Handbook of dimensional measurement, 3rd ed., Francis T.Farago, Curtis, Industrial Press Inc, New York, ISBN 0-8311-3053-9
25. Calibration Device for SMIs based on a new stabilised laseinterferometer, Luca Bochese, Metrology International Conference, Jersalem, Israel 2000

 

Reports
1. Paper presented at the NCSL International Metrology Conference, Luca Bochese, 2002, Tampa, Florida U.S.A.
2. Measurement Uncertainty in Torque Calibration, Luca G. Bochese, Israel Society for Quality, Jerusalem, 1999
3. Report on a new LVDT-based roundness measuring device for large diameters, Luca Bochese (Feanor internal report DEF_REP_018), St.Petersburg, Russia
4. Increasing performance of face gears for aerospace industry (rotorcraft systems), Luca Bochese (Feanor internal report DEF_REP_003), Tallinn, Estonia

 

 

"Luca Bochese" ©