Pubblicazioni in metrologia e controllo qualità

Homepage www.feanor.com

Pubblicazioni Feanor (PDF)
Incertezza di misura nel momento torcente rapporto presentato alla International Conference of Calibration Laboratories - Gerusalemme, maggio 2000
Laserinterferometro trasportabile per taratura SMI- progetto europeo in corso, presentato alla conferenza ISQ - Gerusalemme, nov. 2000

Riviste
Quality Engineering, in lingua tedesca
Opto & Laser Europe in lingua inglese
Quality in Manufacturing, in lingua inglese

Libri
1. Eindimensionale Längenprüftechnik, M. Schaller, K. Tischler, H. J. Bestenreiner, Beuth Kommentare, DIN 1993
2. Längenprüftechnik 1, Grundnormen , Meßgeräte - DIN Taschenbuch 11, Beuth 1991
3. Längenprüftechnik 2, Lehren - DIN Taschenbuch 197, Beuth 1998, 1.2.3.
4. Guide to the expression of measurement uncertainty, ISO 1993
5. Guidelines for evaluating and expressing the uncertainty of NIST measurement results, Taylor, Kuyatt, NIST Tech.note 1993
6. Fundamentals of dimensional metrology, Busch, 12/1998 3ed. Delmar Publishers
7. Handbook of dimensional measurement, 3 rd ed., Francis T. Farago, ASQ Quality Press, Milwaukee, USA
8. Measuring and gaging geometric tolerances, Gary K. Griffith, ASQ Quality Press, Milwaukee, USA
9. An introduction to Measurement and Calibration, ASQ Quality Press, Milwaukee, USA
10. Geometric Tolerancing applications book, Alex Krulikowski, ASQ Quality Press, Milwaukee, USA
11. Metrology, Jerome V. Scholle, 02/1993 Addison Wesley Longman Inc.
12. Optical metrology, 2ed. Kjell J. Glasvik
13. Laser metrology & Machine Performance II, 07/1995 Computational Mechanics, Inc, ed. Hope, Smith and Blackshaw
14. Handbook of surface metrology, D.J.Whitehouse, Institute of Physics Publishing
15. International vocabulary of basic & general terms in metrology, Beuth Verlag 1994
16. Metrology for Engineers, J.F.W. Galyer and Charles Shotbolt, Cassell PLC 1990
17. Dimensional metrology in production and quality control, International Symposium Proceedings, VDI 12/1989
18. Optical measurements: Techniques and Applications, f. Mayringer, Springer Verlag NY Inc 08/1994
19. Interferometric metrology, Norman Bobroff, W.Tyler Estler, 04/1992 American Society for Precision Engineering
20. Basics of interferometry, P. Harihanan 11/1991 Academic Press Inc. Australia
21. Interferometry, W.H. Steel, Cambridge Monographics on Physics
22. Managing the metrology system, 2.ed. C.Robert Pennella, ASQC Quality Press, USA
23. Inspection and Gaging, 6th Edition, Kennedy, Hoffman, Bond, Industrial Press Inc, New York, ISBN 0-8311-1146-6
24. Handbook of dimensional measurement, 3rd ed., Francis T.Farago, Curtis, Industrial Press Inc, New York, ISBN 0-8311-3053-9
25. Mõõtmine, Rein Laaneots, Tallinn 1998
26. Mõõtemääramatus, Rein Laaneots, Tallinn 1998
27. Metroloogia, Rein Laaneots, Tallinn 1994

 

Altri documenti
1. Paper presented at the NCSL International Metrology Conference, Luca Bochese, 2002, Tampa, Florida U.S.A.
2. Measurement Uncertainty in Torque Calibration, Luca G. Bochese, Israel Society for Quality, Jerusalem, 1999
3. Report on a new LVDT-based roundness measuring device for large diameters, Luca Bochese (Feanor internal report DEF_REP_018), St.Petersburg, Russia
4. Application of SPC in the naval military industry, Luca Bochese (Feanor internal report DEF_REP_012), Tallinn, Estonia
5. New trends in designing Fire Control Systems (FCS), Luca Bochese, Chicago, U.S.A.
6. Application of fuel cells in submarine power systems, Luca Bochese (Feanor internal report DEF_REP_005), Tallinn, Estonia
7. Increasing performance of face gears for the military aerospace industry (rotorcraft systems), Luca Bochese (Feanor internal report DEF_REP_003), Tallinn, Estonia

your metrology team at www.feanor.com

 

Accesso area protetta:

username: pwd:

 

 

 

 

 

 

Luca Bochese ©

Servizi